Laren 1000px
LEDPRO / Architectural linear lighting

Neon-Flex Wide

Wide light lines. Distinctive spaces.

Brede, egale lichtlijnen voor winkels, interieurs en architectuur.

30–100 mm wide / breedTop bendWhite · RGB · Pixel
Shoeby winkelgevel met brede Neon-Flex lichtlijnen
Shoeby — LEDPRO project / Brede lichtlijnen geïntegreerd in de winkelarchitectuur.

More width. More presence.

A broad luminous surface gives a lighting design its own character. Neon-Flex Wide combines a flexible silicone housing with a continuous light effect for straight lines and flowing curves.

Een breed lichtvlak geeft het lichtontwerp een eigen karakter. Neon-Flex Wide combineert een flexibele siliconen behuizing met een doorlopend lichtbeeld voor rechte lijnen en vloeiende rondingen.

Choose the section that fits the architectural detail, then specify the light colour, LED configuration and mounting method.

Kies de doorsnede die bij het bouwkundige detail past en stem daarna lichtkleur, LED-uitvoering en montage af.

Neon-Flex 40 mm product and flexibility example

Key advantages / Voordelen

01

Wide luminous surface

Breed lichtvlak van 30 tot 100 mm

02

Straight & curved designs

Rechte lijnen en gebogen vormen

03

Project-specific configuration

Lichtkleur en montage afgestemd op het project

Dimensions & construction / Maten en constructie

Five wide sections for different scales of design. All sizes below are width × height.

Vijf brede doorsneden voor verschillende ontwerpformaten. Alle onderstaande maten zijn breedte × hoogte.

*Indicative weights from the existing section documentation; confirm for the selected assembly.
Indicatieve gewichten uit de bestaande doorsnededocumentatie; te bevestigen voor de gekozen uitvoering.

Configurations / Uitvoeringen

The configurations below are listed for 3020, 4025 and 5025. Select one complete configuration per project.

Onderstaande uitvoeringen zijn opgenomen voor 3020, 4025 en 5025. Per project wordt één complete uitvoering geselecteerd.

Section / DoorsnedeColour / KleurVoltagePower / VermogenCut / SnijmaatLength / Lengte
3020White & single colour / Wit en enkelkleur24 VDC16 W/m50 mm5 m
3020RGB24 VDC16 W/m50 mm5 m
3020Pixel RGB24 VDC28.8 W/m55.6 mm5 m
4025White & single colour / Wit en enkelkleur24 VDC16 W/m50 mm5 m
4025RGB24 VDC16 W/m50 mm5 m
4025Pixel RGB24 VDC28.8 W/m55.6 mm5 m
5025White & single colour / Wit en enkelkleur24 VDC16 W/m50 mm5 m
5025RGB24 VDC16 W/m50 mm5 m
5025Pixel RGB24 VDC28.8 W/m50 mm5 m

7030 & 10030: electrical configuration, light output and cutting interval on request.

7030 en 10030: elektrische uitvoering, lichtopbrengst en snijmaat op aanvraag.

5 m is the listed product length, not a verified maximum powered run.
5 m is de vermelde productlengte, niet een bevestigde maximale voedingslengte.

Technical specifications / Technische gegevens

Material / MateriaalSilicone / Siliconen
Bending direction / BuigrichtingTop bend — bend only in the intended direction / Alleen buigen in de voorgeschreven richting
White CCT / Witlicht CCT3020 / 4025: 1800–6500 K, configuration dependent / afhankelijk van uitvoering
CRI3020 / 4025 white: Ra >80 / >90 options / witlichtopties
Beam angle / Stralingshoek120° (3020 / 4025 / 7030 / 10030)
Ingress protection / Bescherming3020 / 4025 / 5025: IP67, finished assembly / afgewerkte uitvoering. 7030 / 10030: on request / op aanvraag
Temperature / TemperatuurOperating range on request / Bedrijfstemperatuurbereik op aanvraag
Max. run single / double feedProject-specific / Per project vast te stellen

The IP rating depends on the complete assembly, cable entry and end sealing. Specify the required environmental conditions when ordering.

De IP-waarde hangt af van de complete samenstelling, kabelinvoer en eindafdichting. Geef de gewenste omgevingscondities op bij bestelling.

Mounting & accessories / Montage en accessoires

Matching end caps, cable-entry end caps and aluminium mounting clips are available for the wide sections. Aluminium profiles provide support for straight installation.

Bijpassende eindkappen, eindkappen met kabelinvoer en aluminium montageclips zijn beschikbaar voor de brede doorsneden. Aluminium profielen ondersteunen een rechte montage.

The existing 7030 drawing shows a 72 × 30 mm mounting profile; the 10030 drawing shows 102 × 33.5 mm. Check the final fit and fixing detail before construction.

De bestaande 7030-tekening toont een montageprofiel van 72 × 30 mm; de 10030-tekening toont 102 × 33,5 mm. Controleer de definitieve passing en bevestiging vóór uitvoering.

Profiles for wide sections / Profielen voor brede maten

70x30 doorsnede en 72x30 montageprofiel

7030: section and mounting profile / doorsnede en montageprofiel.

Coordinate housing, support and bend radius. / Stem behuizing, ondersteuning en buigradius op elkaar af.

Flexibility in practice / Flexibiliteit in beeld

Technical documentation

Dimensions and accessories from the existing Wide documentation.

Maatvoering en accessoires uit de bestaande Wide-documentatie.

Download PDF / Technische documentatie ↗
Don`t copy please